LIQUEUR DE TIRAGE

    A mixture of still wine, sugar, and yeasts used for the production of sparkling wines, including Champagne and traditional method sparkling wines, in order to induce secondary fermentation and thus the formation of carbon dioxide bubbles. Note: The addition of liqueur de tirage is the basis of the méthode champenoise system. Its principle, applied by the English as early as the 15th century to restore wines that had deteriorated during transport, consisted of adding “enormous quantities of sugar and molasses…” to the wine or presumed wine, often combined with flavorings. The purpose was to restart fermentation in the barrel to obtain a “wine” in which the amount of residual sugar and aromatic products satisfactorily masked taste defects. Moreover, the effervescence obtained in this way made it sparkle. When some innkeepers had the idea of putting it into thick and resistant glass bottles produced by English glassworks of the time, the wine sparkled without difficulty. This led some to say, somewhat hastily, that champagne is an English invention! But it is not enough for a wine to produce foam to be champagne; it must also demonstrate that it has the necessary qualities. Given the success of this drink, the method was adopted and refined in Champagne, albeit not yet precisely, with sometimes too light dosages and therefore little foam, or conversely with excessive dosages and consequent bottle explosions. To the point that workers were forced to wear masks to protect themselves from explosions, until an oenometer was developed in 1836 by a pharmacist from Châlons-sur-Marne: Jean-Baptiste François. Today it is known that 20 to 26 grams of sugar per liter of wine must be added to obtain one more alcoholic degree and a pressure of 5 to 6 atmospheres to produce a sparkling wine. A lower pressure (3 to 4 atmospheres) will result in a crémant. Today, liqueur de tirage is prepared by mixing wine and refined cane or beet sugar at approximately 50%. Since 4.2 g/l of sugars, after fermentation, produce 1 atm of overpressure in the bottle, to obtain a pressure of 6 atm, which is the average pressure of sparkling wine bottles, 55 ml of liqueur de tirage per liter of wine, selected yeasts of the Saccharomyces cerevisiae or Saccharomyces bayanus type (in the measure of 2-5%), and mineral substances (ammonium salts, necessary for yeast development) are required.
    LIQUEUR DE TIRAGE - Wine Glossary | d'Araprì