BOTTLING

    During bottling, the cork is compressed by the jaws of the corking machine from 24 mm to 15-16 mm (two-thirds of its diameter) and is then inserted into the neck of the bottle, where it immediately attempts to regain its original dimensions. Since the internal diameter of the neck is between 18-21 mm, the cork remains compressed to approximately 75-85% of its diameter along the entire length of the conical neck. After diameter compression, in theory, the cork can immediately recover about 85% of its original diameter, and it takes several hours to return to its initial dimensions. The adherence of the cork to the bottle increases over time after bottling. Inserting the cork into the bottle acts like a piston and compresses the air in the headspace. If freshly corked bottles are laid down or inverted immediately after bottling, with the air pressure inside the bottle (up to 2 or 3 atm) and the cork having only partially recovered its size, wine leakage can occur. It is recommended to keep the bottle upright for several minutes, or even better for a few hours, after bottling. Two methods can be used to reduce pressure in the bottle. The best involves creating a vacuum in the bottle's headspace at the time of corking. The second, less expensive method, is to inject CO₂ into the bottle's headspace before inserting the cork.
    BOTTLING - Cork from A to Z | d'Araprì